Replacement · Tested to GB2626-2019
SKU VQ-FP120
Ten KN95-class pads for reusable facepieces.
Snap-on pads that turn any VQ reusable facepiece into a dust respirator. Use them alone for sawdust and sanding, or stacked over carbon cartridges when you have both dust and fumes.
For consumer and light DIY use. Not a medical device.
| Type | Replacement particulate pads |
|---|---|
| Fits | VQ-RH500, VQ-RH520 and VQ-RF900 facepieces |
| Class | KN95 |
| Filtration efficiency | At least 95% for non-oily particles (tested to GB2626-2019) |
| Supplied as | 10 pads with retaining rings |
| Replace when | Breathing becomes harder, or the pad is dusty, crushed or wet |
Replace the pad at the end of a heavy session. Do not shake it out and put it back — the media holds the fine fraction that matters most.
Seat the retaining ring so the whole pad sits flat against the facepiece. A pinched edge is a leak path.
Keep spare pads in a sealed bag. Water collapses the electret layer and the pad stops working well.
One heavy session, or light use across a couple of short jobs. Change it as soon as breathing gets noticeably harder or the pad looks loaded with dust.
Yes — a pad on its own is all you need for sawdust, sanding and general DIY dust.
They are sized for VQ reusable facepieces and the VQ-CA210 cartridge. They are not a universal-fit pad.
Replacement
For the smells that dust masks do not stop.
Reusable
A soft, reusable facepiece that takes twin cartridges.
Replacement
The small parts that decide whether a facepiece keeps working.